ACROLINK 7N-DA3300 MEXCEL
The standard models of the MEXCEL cable series, the 7N-DA3300 and DA3100 carry over without compromise the essential qualities of the 7N-DA6300II/DA6100II flagship models.
The series also inherits “gigabit level flat transmission” with wich flat transmission is possible even up to the gigahertz range. The audibly wide-range feel and dynamism brought about by excellent frequency response are both exceptionally pure as is the sound texture. The top-level expressiveness shared by the entire MEXCEL series is suffused with a sense of space that lets you forget about the cables in the audio system.
The 7N-DA3300 is a twin core + shielded XLR balanced cable, and the 7N-DA3100 is a coaxial cable (RCA, BNC). Both midels have a φ0.8mm solid core MEXCEL (single core) center conductor that supports tight, powerful sound quality in these offshoots of the flagship models. (A thick silver-coated copper-braided shield is employed to increase S/N)
Cable and Material Specifications
| Conductor |
: |
7N Cu MEXCEL solid core 0.8mm×2 (Balanced twin-core structure) |
| Insulation |
: |
Polyethylene |
| Shielding |
: |
Copper clad mylar tape + silver plated copper braided wire |
| Outers sleeve |
: |
UV resistant Polyurethane |
| Conductor resistance |
: |
36.4 mΩ/m |
| Impedance |
: |
110 Ω(XLR & AES/EBU) |
| Cable diameter |
: |
9.5 mm |
|
RCA Connector
| Positive terminal |
: |
Tellurium copper |
| Negative terminal |
: |
Beryllium copper |
| Plating |
: |
Mirror polish treatment with direct rhodium plating |
| Outer body material |
: |
Aluminum + Carbon fiber |
|
XLR Connector
| Contact terminal |
: |
Phosphor bronze |
| Terminal plating |
: |
Direct rhodium plating |
| Outer body material |
: |
Brass |
MEXCEL is a conductor insulation technology using a system called MEDIS®(Mitsubishi Electro Deposition Insulation System)
which is developed and patient technology by Mitsubishi Cable Industries Ltd. Each conductor is perfectly and evenly insulated |
| Standard length for 7N-DA3300ⅣMEXCEL is 1.0m pair.Special length order available. |
|
Typical Analysis (Impurities)
| Fe |
Ni |
Si |
Al |
| 0.03 |
0.003 |
0.04 |
0.005 |
| S |
Ag |
Na |
K |
| 0.05 |
0.04 |
0.004 |
< 0.005 |
| U |
Th |
H |
O |
| < 0.0002 |
< 0.0003 |
< 0.03 |
< 1.0 |
|
| Typical Analysis(impurities) |
ppm/GD-MS Gas Analysis |
|
