The F1-8 loudspeaker distils the same technology and expertise utilised in its floorstanding siblings, into a smaller standmount format. The hand crafted cabinet is supported on a machined aluminium plinth that houses Fyne’s state of the art BassTrax LF diffuser. Surrounded by FyneFlute rubber surround, the F1-8 features a 200mm IsoFlare low frequency driver mated to a 25mm magnesium dome compression tweeter to create a point source, time aligned transducer delivering pure isotropic radiation across the entire audio spectrum. Hand finished at Fyne Audio’s UK manufacturing facility in stunning real walnut veneer with burr walnut inlay, the F1-8 represents the pinnacle of Hi-Fi UK loudspeaker design in standmount speaker format.
|System Type||2 way, downwards firing port, with BassTrax Tractrix diffuser*|
|Recommended amplifier power (Watt RMS)||30 – 180|
|Peak power handling (Watt)||360|
|Continuous power handling (Watt RMS)||90|
|Sensitivity (2.83 Volt @ 1m)||91dB|
|Nominal impedance||8 Ohm|
|Frequency response (-6dB typical in room)||33Hz – 34kHz|
|Drive unit complement||1 x 200mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm magnesium dome compression tweeter, ferrite magnet system|
|Crossover type||Bi-wired passive low loss, 2nd order low pass, 1st order high pass. Deep Cryogenically Treated|
|System adjustments||Presence (2.5kHz – 5.0kHz) +/- 3dB|
|Dimensions – HxWxD||470 x 280 x 441mm (18.5 x 11.0 x 17.4”)|
|Weight – Each||15.2kg (33.5lbs)|
|Finishes||Piano Gloss Walnut|
Notes: Bookshelf dimensions includes grille, terminals, and any plinth, but excludes feet. Floorstand dimensions includes grille, terminals and plinth, but excludes spikes. Subwoofer dimensions include feet. All information was correct at the time of publishing. Fyne Audio Ltd reserve the right to amend details of the specification without notice in line with our policy for continuous improvements.